Deals on the Garrett AT Pro and AT Gold  Metal Detectors are revolutionizing the Industry.

That's right the ATGold and the AtPro Adventure Packs for Land and Water Beach Metal Detectors are all you need for Treasure Hunting.

Garrett Metal DetectorsAre other Dealers Making your Head Spin   Were Fast, Honest, and Courteous. Garrett Metal Detectors

Accurate Metal Detectors Since 1993

 Toll Free 800-662-0810  or Land: 361-808-9606 Text 361-255-9300

Professional  Garrett Gold Prospecting & Hobby DetectingGarrett Metal Detectors Garrett Metal Detectors  Garrett Metal Detectors  Garrett Metal Detectors Credit Cards and PayPal Accepted

All Terrain Adverture Packs. 5 Great Items. One Great Price. 2 Packs To Choose From. Spring Special March 1 thru May 31, 2013. SAVE. Learn more.

Call for Details toll Free 800-662-0810  Office Line 361-808-9606  Cell for Text 361-255-9300

Garrett Metal DetectorsEmail Questions Here

 

 

  Never Pay Retail Call our Staff for Free Advice

  AT PRO by Garrett

Good to 10 Feet of water

The Perfect Beach and Water Wading Metal Detector

Garrett Metal DetectorsEmail Questions Here Toll 800-662-0810  Land 361-808-9606

Never Pay Retail Call our Staff for Free Advice

AT GOLD by Garrett

Good to 10 Feet of water

The Perfect Beach and Water Wading Metal Detector

Garrett Metal DetectorsEmail Questions Here  Toll 800-662-0810  Land 361-808-9606

 

  Garrett Metal DetectorsHOBBY DETECTORS

Garrett Metal Detector

Treasure Ace 250

 

 

Do not pay $249.95 Buy Online and Save

800-662-3028

  Garrett Metal Detectors

Garrett Executive Models

GTI 2500 Metal Detector

 Buy Online Or Call and Save

Do not pay $1099.95

For Only $934.95

800-662-3028

Unbeatable Internet Promotions

 
     

Garrett Seahunter Mark II Metal Detector

Garrett Metal Detectors

Underwater Series

The Garrett Sea Hunter Mark II

800-662-3028

Unbeatable Internet Promotions

 

  Garrett Metal DetectorsGarrett Metal Detectors

Infinium LS Underwater Detector for Beach, Relic,& Gold Detecting

 Buy Online Or Call and Save

Now Only $1062.50

800-662-3028

Unbeatable Internet Promotions

 

 

 

 

 

Security Garrett WALK THROUGH, METAL DETECTOR

Most Popular in the USA

CS5000 Details

Garrett Metal Detectors

CS5000 Walkthrough Metal Detector

PD6500i Details

Garrett Metal Detectors

CS6500 Walkthrough Metal Detector

 Brand New  Best of the Best Garrett AT Pro and AT Gold for water and land Hunting.

 

Click On manufacturer for Information and Special Sales and Promotions

Garrett Metal DetectorsEmail Questions Here

Accurate Metal Detector        Since 1993

      Garrett Metal Detectors      Garrett Metal Detectors    Garrett Metal Detectors        

nter mark ii is a deep water and beach detector for hunting the Surf. This

As an Authorized Garrett Metal Detector Dealer. Detectors like the Treasure Ace 250, GTP 1350, GTI 2500. Garrett Metal Detectors are also well know for the security airport type detectors such as the super scanner, Super Wand and their Walkthough detection devices.

Reviews

Best Products, Best Customer Service

In the mid-1960s Charles and Eleanor Garrett introduced the world to The Hunter, the first Zero Drift, Dual Search coil detector ever made. And with it they espoused a new philosophy that challenged the way the world would forever view the metal detection industry. "We will build the best possible metal detector and offer the best customer service," they said.
40 years later, as you can imagine, we're still passionate about our detectors. In fact, you might even say we're a little over zealous. But, whether your treasure's been resting at the bottom of the sea for centuries, buried in an old battlefield for decades or lost at the park yesterday, you can rest assured Garrett has engineered the right detector that will fit your needs and budget.

 

GARRETT COMPLETES SUCCESSFUL METAL DETECTOR INSTALLATION AT OLYMPIC WINTER GAMES

Garrett Metal Detectors Supplies, Installs and
Monitors Metal Detectors in Torino, Italy
Review

GARLAND, Texas - February 14, 2006 - Garrett Metal Detectors, the Official Supplier of Metal Detectors for the 2006 Olympic Winter Games, recently completed a successful installation of walk-through and hand-held metal detectors at Olympic venues throughout Torino, Italy. The installation included 450 PD 6500i walk-through and 900 SuperScanner hand-held metal detectors, with additional detectors reserved for spares. Garrett Metal Detectors is the global leader of walk-through and hand-held metal detector products and training.

"Garrett was awarded the 2006 Olympic Winter Games Official Supplier of Metal Detectors contract early last year," states Robert Podhrasky, Sr. VP and Director of Engineering for Garrett Metal Detectors. "We began building our walk-through metal detectors for this event in our Garland manufacturing plant in August 2005. By October 2005, we started shipping our metal detectors to Italy for installation. Currently we have metal detectors set up at over 50 Olympic sites in and surrounding the city of Torino, the Olympic Village, and mountain venues."

Three pre-test events were held between early 2004, and February 8, 2006, to ensure the proper training and planning were in place. Installation at all Olympic venues was completed in late January 2006. During the course of the Games, nine Garrett engineers and technicians, along with the Company's Italian representatives will be on hand to help monitor and provide technical assistance for the walk-through metal detectors.

"We've been supporting the Olympic Games since 1984," adds Podhrasky. "In fact, that year was the first that a comprehensive metal detector checkpoint installation was used for security measures taken during an Olympic Games event. The '84 installation, which consisted of 60 walk-through and 120 hand-held Garrett metal detectors, was prompted by the 1972 Olympic Games terrorist attacks in Munich. Since that time we've been the primary supplier of walk-through and hand-held metal detectors for the Olympic Games. Torino marks the 8th Olympic metal detector installation for our Company."

Garrett also provided metal detector checkpoint training to Torino police forces and the Torino Olympic Organizing Committee (TOROC) officials. Training included how to achieve optimum throughput through effective walk-through pacing practices and proper hand-held scanning techniques.

Garrett's PD 6500i walk-through metal detector, which is used in select airports across the US, offers exclusive multiple target pinpointing with 33 distinct zones for full target coverage on the left, center and right side of the body from head to toe. It is also designed to withstand extreme cold temperatures, from -4°F (-20°C), that are typical during the Olympic Winter Games.

GARRETT INTRODUCES NEW GROUND SEARCH METAL DETECTOR TO HOBBY INDUSTRY

GARRETT ACE 250 Marks Change for Metal Detector Hobbyists

GARLAND, Texas – January 3, 2005 – Garrett Metal Detectors has added the Garrett ACE 250 and 150 units to its line of ground search metal detectors for treasure hunters and hobbyists. These ACE units are designed for locating lost, hidden or abandoned treasure and other similar metal objects. Garrett Metal Detectors manufactures ground search, walk-through and hand-held metal detection products for hobby and security applications worldwide.

“The ACE 250 and 150 units represent a major change in the philosophy of today’s hobby metal detection products,” notes Jim Dobrei, VP & Director of Sales & Marketing for Garrett Metal Detectors. “Over the past couple of years our industry has struggled to keep up with the consumer electronics industry in providing affordable, high tech products that invited new customers to our hobby and expanded our customer base. The ACE machines, however, mark the end of that era. We’ve loaded the ACE 250 and ACE 150 detectors with features and performance that were, until now, only found on more expensive metal detectors. We are very pleased with the high level of interest these detectors have generated from veteran treasures and especially among those new to our hobby.”

Both units feature Garrett’s exclusive Graphic Target Analyzer (GTA) technology, Sensitivity adjustments, Continuous Coin Depth Indicator and Target ID Legend. The ACE 250 also offers Accept / Reject Trash Elimination, Electronic Pinpoint and Continuous Battery Life Indicator. The ACE 250 and 150 units include the 6.5 x 9” PROformance submersible searchcoil with two optional coils including the 4.5” Sniper searchcoil and 9x12” PROformance searchcoil. Additional ACE accessories include the ACE Tote bag, ACE Sport Phones, Sport Cap and Sport Visor.

About Garrett Metal Detectors
Garrett Metal Detectors is the global leader in the research, development and manufacture of hobby and security-related metal detection products and accessories. Garrett is International Standards Organization (ISO) 9001:2000 certified. For a complete listing of Garrett Metal Detectors' products

 

The SuperScanner is possibly the most recognized hand-held metal detector in the world and has led the industry for over 20 years. It is designed to detect a medium sized pistol from 9"; large knife from 6"; razor blade and box cutter from 3"; foil-wrapped drugs and tiny jewelry from 1".

Garrett Metal Detectors has supplied walk-through and/or hand-held metal detectors to the following Olympic Games: Los Angeles, California, USA; Seoul, Korea; Barcelona, Spain; Atlanta, Georgia, USA; Nagano, Japan; Sydney, Australia, Salt Lake City, Utah, USA; Athens, Greece; and Torino, Italy.

The Company has submitted proposals for the 2008 Beijing, China, and 2010 Vancouver, Canada, Olympic Games.

About Garrett Metal Detectors
Garrett Metal Detectors is the global leader in the research, development and manufacture of hobby and security-related metal detection products and accessories. Garrett is International Standards Organization (ISO) 9001:2000 certified. For a complete listing of Garrett Metal Detectors' products and services.

At pro Review

As I crested the top of the ridge and looked into the creek below, I was delighted to see I had plenty of new ground to work with the AT Gold. Just as I had hoped, there were fresh diggings and newly exposed bedrock just waiting to be detected.
Every weekend, like clockwork, a group of gold prospectors from Phoenix, Arizona, would visit this dry creek and spend hours shoveling the gold-bearing gravels into their dry-washers.
For those not familiar with a dry-washer, it is an ingenious device used to separate particles of gold from dirt by using bursts of air and electrostatic attraction. They work exceptionally well in arid regions and are usually the preferred piece of mining equipment for desert prospectors.
If conditions are ideal, a dry-washer can trap upwards of 85% of the gold being shoveled into it. However, if the dirt is not completely dry there is a good chance some gold will pass over the riffle tray and onto the ground. Not to mention there is always the possibility that a large nugget will not pass through the grizzly and be screened off and discarded with the oversize rocks.
Many big nuggets that were encased in dirt or covered in caliches have been lost in this manner. In fact, I know a gentleman that detected a nugget weighing nearly 23 ounces in one of these oversize piles!
The first time I bumped into this group of prospectors I noticed none of them had brought along a metal detector. I didn’t want to come across as a know-it-all, but I did my best to explain the importance of using a detector in conjunction with their dry-washers.
When I suggested they should start scanning their holes and header piles for nuggets, they just shrugged their shoulders. One of them replied, “We tried a detector once. All it did was squawk and beep; the thing gave me a headache. Plus all I ever found were bullets and nails. No, we don’t have much faith in detectors around here.”
After that I didn’t have the heart to tell him I had already found about a dozen nuggets in the open holes they had left behind. If you use a dry-washer it is imperative that you scan your work area, otherwise you will leave gold behind. I know because I found some of these “missed” nuggets with my new AT Gold.
Before we discuss the results of my field test, let us first cover some information about this exciting piece of hardware from Garrett.
The AT Gold (ATG) is a VLF detector, which operates at approximately 18 kHz and is outfitted with a waterproof 5” x 8” elliptical DD coil. I was incredibly pleased with both the quality and performance of the supplied coil. It is an ideal size and shape for chasing gold.
The detector itself weighs in at roughly three pounds and is powered by four AA batteries. It features an LCD screen and all push button controls. The ATG has been specially designed for sniffing out gold nuggets; however it also has the ability to find coins, relics, jewelry or meteorites. Because the ATG can also be submerged underwater to a depth of 10 feet, it is one of the most versatile detectors on the market today.
It is supplied with standard land-use headphones with adjustable volume control. These headphones should never be submerged. If you plan on working underwater, Garrett does offer fully waterproof headphones.
The ATG offers a total of three detection modes that can be adjusted using the MODE button. These include: All Metal, DISC 1, and DISC 2. If you plan on using the ATG primarily for nugget-shooting I would highly recommend using the All Metal mode. This is the most sensitive mode and will allow the operator to hear even the tiniest nuggets that may have escaped detection in either of the DISC modes.
The All Metal mode will force a person to dig more trash, but this is a small price to pay for the heightened sensitivity and added depth penetration.
The Digital Target ID system found on the ATG provides a specific value to help the user identify targets more accurately. Unknown targets are identified in the LCD with a number. This number is a representation of the target’s conductive properties. Numbers closer to 1 are the most ferrous; numbers closer to 99 are the most conductive.
The Digital target ID number can be used in conjunction with the Target ID Cursor that is found just beneath the Target ID Legend. The Target ID Cursor will move along the Target ID Legend and settle on the place that best represents the target found.
Ferrous targets show up on the left half, non-ferrous targets that are lower in conductivity will show in the middle, and highly conductive targets will show on the right half. The Digital Target ID is more precise than the Target ID Cursor, however, when used together it is fairly easy for the operator to get a general idea of what type of target has been detected.
I applaud the engineers at Garrett for adding an adjustable Threshold to the ATG. When I field-tested the AT Pro back in 2010, the lack of a Threshold was one of my biggest complaints. Some hunters find the constant hum of a threshold to be annoying, but as experienced gold seekers know, that hum is packed with a lot of valuable information.
Often times a small or deeply buried gold nugget, will not always produce a clear, distinct signal. Many of these subtle targets will only trigger a slight waver in the threshold and a silent search machine could potentially miss them. I give Garrett a big thumbs up for listening to user feedback and including this crucial feature.
Another feature worth mentioning is the Iron Audio. It will work in either of the DISC modes, but what makes it unique is the ability to use Iron Audio while in the All Metal mode.
Normally when operating in All Metal, the ATG gives off a medium pitched tone for all metallic targets. However, with the Iron Audio feature activated, a low tone response will be given when a ferrous target is encountered. Most detectorists, myself included, don’t enjoy having to bend down and get back up again any more than necessary. This feature can help a person decide whether a target is worth digging or not.
I would not recommend that anyone hunt continuously in Iron Audio, but rather use this feature to check the ferrous properties of a target. If a detected target gives a low, grunt-like sound, there is a good chance it is made of iron. If a detected target gives a medium or even a mixed medium and low sound, the target is likely non-ferrous and should be investigated. I would suggest you dig all iffy targets while in Iron Audio just to be safe.
The ATG is also equipped with a Pinpoint feature. When the Pinpoint button is depressed and held, it enables the ATG to continuously detect without motion. This is a handy feature for narrowing down the location of a buried object and will certainly be appreciated by those with little detecting experience.
More seasoned users will also find it handy, but personally I found it incredibly easy to pinpoint targets without having to activate this feature. The supplied 5” x 8” coil is dead-on when it comes to pinpointing and I had little trouble even on targets as small as a lead shot.
The creek bed I mentioned at the beginning of the article is where I spent several days testing the ATG. As far as locations go, this one was ideal. It had produced some quality nuggets for me in the past, and with all the recent digging I knew there had to be a few that were now within detectable reach.
Although this particular soil was nowhere near as “hot” as some of the ground I had encountered in Australia, it still contained enough black sand and mineralized clay to provide an opportunity for the ATG to prove itself.
On a scale of 1-10, with 10 being the worst, I would rate this sites’ overall ground condition as a 7. There were several different types of hot rocks present, but none that proved overly problematic.
During those first few hours I dug a number of targets from the cracks in the bedrock. None were gold, but I was thoroughly impressed at the ATG’s ability to ring out on such tiny objects. Any doubts I had about the unit’s sensitivity quickly evaporated after digging up targets so small I had difficulty isolating them in my hand.
Day one netted me a handful of junk targets, plus two small nuggets near the surface weighing in at 0.3g and 0.2g. Day two produced fewer targets, but much to my delight one was a 2.6-gram beauty! It had been up on the bank’s edge and screamed out like trash. Fortunately I had taken the advice given by the Iron Audio to not leave this target unchecked.
When compared to other similar priced detectors on the market, the ATG is certainly a formidable contender. It proved a capable VLF detector for tackling the Arizona goldfields and didn’t leave me sore from hours’ worth of swinging.
I also had the chance to test its water resistance at a nearby stream. Even with the coil completely submerged, the ATG ground balanced easily and I didn’t notice any loss of stability. This detector did not seem bothered by the elements in the least.
Although I didn’t turn up any nuggets, I have no doubt this feature will prove advantageous. Especially for those that prospect in California, Oregon, Alaska, and Canada where there are many gold-bearing rivers, creek, and streams.
The controls I found myself using the most were the GND BAL button, the Iron Audio button, and the Sensitivity controls to some extent. Ground balancing is a crucial part of detecting and must be done every time the machine is turned on.
Sometimes, if ground conditions are severe, it may be required every few minutes. Persons that do not take the time to ground balance, or use equipment with poor ground balancing capabilities, will most definitely leave good targets behind.
Luckily this procedure on the ATG is quick and utterly painless. The ATG can be ground balanced either automatically or manually. Auto is the easiest and is accomplished by simply holding down the GND BAL pushbutton while pumping the coil towards the ground.
In some cases, I was able to achieve a marginally more precise balance by using the manual control. However, more often than not I found myself relying on the accuracy of the ATG’s GND BAL circuitry.
This detector also includes technology Garret calls Ground Balance Window (GBW). This feature allows the user to “spread” out the ground balance setting to reduce the effects of subtle ground variations. I did experiment with this option, but did not find it very advantageous in this particular spot. It is an interesting concept and I will most definitely be testing this feature further on other goldfields around the state.
When hunting gold with the ATG, I would recommend using the All Metal mode and the highest Sensitivity level possible. These settings will allow smaller and deeper targets to be found, however, the Sensitivity level used will ultimately be determined by the ground and atmospheric conditions present.
Low ground mineralization and low EMI interference will allow high settings to be used. If the ground mineralization is severe, or there are high levels of EMI, lower settings will be required.
Detectorists are always striving for a smooth, steady Threshold. A smooth Threshold will allow the operator to hear subtle variations that may represent a nugget on the edge of detection.
This ideal Threshold was nearly impossible to achieve while in the All Metal mode at Sensitivity settings of 5 or greater. The ATG was more erratic in its performance, but I simply learned to live with it.
For me personally, the extra jitter was worth the gains in sensitivity. I am always willing to put up with a bit more noise if it equates into more gold in my pocket.
If you find your machine too unstable to use comfortably, I would first suggest lowering the Sensitivity a notch. If small fluctuations are still heard, you can also try adjusting the frequency.
The ATG has the ability to slightly alter its operating frequency to help combat noise caused by external sources, such as power-lines and other metal detectors. There are four slightly different frequencies to choose from. These frequency adjustments are small and will not affect detection performance.
I would also suggest that a person does not rely completely on the numerical Target ID, or the Iron Audio.
These features offer the prospector valuable information about a target’s possible identity, but they are not 100% accurate.
Much of the time they were, but if there was any doubt at all I dug the target out. Better to be safe than sorry when it comes to gold.
ATG users will also notice that the Target ID will often “bounce” when the coil is repeatedly passed over a target. I have gotten as many as five different ID’s for the same target. Once again, this is normal.
I found that if the Target ID’s ranged predominantly between 40-85, the target was worth digging. I also want to mention that very tiny or deeply buried targets may not trigger the Target ID system even though they produce an audio signal. I would always recommend digging these targets, or at least removing enough soil until a Target ID can be achieved.
I found the ATG to be an incredibly fun and stress free machine to hunt with. Some of its strengths were: easy operation, lightweight, automatic pushbutton ground balance, highly sensitive, reasonable price tag, and extremely weatherproof.
Potential ATG customers will be glad to know that Garrett offers a wide range of accessory coils. Coil configuration, size and shape can have a dramatic effect on any metal detector’s performance, and the ATG is no exception.
Simply changing the coil can increase depth penetration, help eliminate false signals caused by ground noise, improve sensitivity, and provide added ground coverage.
If you are looking for a quick and relatively inexpensive way to enhance the performance of the ATG, additional search coils are a good place to invest.
If you decide to buy the ATG there are two other items, which I highly recommend you purchase.
The first is the 1/4” Headphone Adapter. This accessory item allows you to use any headphones that have a 1/4” male jack. Without this adapter you will only be able to use the supplied Garrett headphones that have a special connector.
The second item is a coil cover. Unfortunately the unit is not supplied with one, and the coil itself is vulnerable to damage.
A coil can take a lot of abuse in the field so it is important to get one as soon as possible. Trust me, a worn out coil cover is a lot less expensive to replace than the coil itself.
The new AT Gold is truly a multi-purpose detector that will appeal to a wide range of detectorists. In my opinion, it is a good choice for those that want to focus primarily on gold prospecting, but may occasionally do some coin and relic hunting as well.
With an MSRP of $799.95, it offers versatility and performance at a reasonable price.
I would not hesitate to recommend the ATG to a budget-minded person looking for a quality nugget machine.
 

Garrett AT Pro Metal Detector Review

I have been using the Garrett AT Pro heavily for a while now.  As such, I wanted to give folks my review of this “all terrain” metal detector.  Garrett has tried to make an all purpose detector, at a mid range price point – but has it succeeded?  Let’s see.

Chris Gohlson

Garrett has tried to bring a lot of stuff together on this machine.  And I think they have done an exceptional job on this detector.  You will be hard pressed to find a detector this good in this price range (about $600).  And with that, let’s dive into it.

Appearance

Garrett AT Pro Metal Detector

The AT Pro sports a nice, solid black coloring with silver accents.  I think it looks really cool and sleek.  Of course, it sports that double D coil that works really nicely.  More on that later.  People comment on the size of the readout.  I think they think it’s too small.  I think it’s fine, but I have really good eyesight.  Folks also comment about no backlighting on the screen.  I figure if you are hunting in dark, you can hook up an LED.  Personally, I don’t think it’s a huge deal and most people won’t need it.  So, with that, let’s more in depth on the AT Pro Control Panel Screen.

Control Panel Screen

AT Pro Control Panel Screen

Target Identification

There are two things to notice when we have a target under our coil.  The first is the notch identification.  On the screen above, we can see that it shows a quarter.  The other thing to notice is the Target ID, or TID.  It shows an 85, which actually seems low for a quarter signal.  Anyway, these will tell you what you are looking at.  After some use, you will wonder how you did without the TID.
Modes

The AT Pro sports 6 distinct modes.  You can see them on the left side of the control panel.  There are Basic: custom, coins, and zero modes.  And there are Pro: custom, coins, and zero modes.  Most beginners start out in basic mode.  It gives very basic target chimes.  Most users quickly move to pro mode as it gives a lot more auditory clues.  It also has much quicker recovery between targets.  Again, once you use the pro mode, you will wonder how you could have fared without it.

Discrimination

In the top left of the control panel we also see the number “30.”  This shows the amount of iron discrimination.  If you run it up to “40″ it will give you very good iron discrimination.  This will effectively silence any reading below 40.  You can also use iron audio in conjunction with this.

Iron Audio

Iron audio is a sort of fine control on the iron audial cues.  For example, if you set the iron discrimination at 30 and then turn on iron audio, you will change how the low tones, mid tones, and high tones work.  In this example, the low tones would be from 0 to 30.  The mid tones would run from 30 to 75.  And the high tones will go from 75 up.  If you did not use the iron audio, then the low tones would go from 30-40.  I hope you can see the difference.  This can be a very nice tool.

Coin Depth

The right side of the control panel shows you a calculated depth.  Now, this works well when the object is what the AT Pro expects.  For instance, if you have a silver dime under the coil at around 6 to 8 inches, it will most likely read in the mid to upper 80s.  When you start digging and get close, the TID will get higher.  But, if the object is a larger piece of copper, you may get the exact same reading.  What you will probably find is that the large piece of copper can be much deeper.  So, if you start digging and get to 6 to 8 inches and it still reads the same – probably a large piece of copper.  For coins, however, this reading does well in most circumstances.

Sensitivity

The lower bar, under the TID, shows the amount of sensitivity.  You want to run this as high as you can.  Just know, there are times when more is not better!

Pinpointing

The large button does what it says.  I have found the pinpointing to be pretty good, all things considered.  You will run into trouble when hunting in trashy areas.

Notch Discrmination and Elim

These are used together to “notch out” discrimination.  Let’s say there are a ton of washers in the area you are hunting.  They keep showing up as quarters.  You could notch discriminate those and not hear them.  Of course, you will lose targets as well.

Ground Balance

The ground balance button allows you to automatically adjust ground balance or do it manually.  This is crucially important to deal the mineralization at a site.

Usability

Most users will find the AT Pro very easy to use.  Yes, there is skill to using it, but the level of entry is not high.  That is one thing I really love about this machine.  I could show an absolute beginner how to use it proficiently in a few hunts.

Weight and Balance

This isn’t the lightest machine, but just over 3 pounds, it’s not bad at all.  I can swing this thing all day – and I have done that.  Some people complain that it is a little nose heavy, but I don’t feel that.  If you start rushing, it will hurt your shoulder after a while.  But that goes for any detector.

Connectors

Now, this is something I don’t like about the AT Pro.  The connectors are proprietary.  You can stick a standard set of headphones into this machine without an adapter.  I don’t understand that choice.  The connectors are also a little tough to get in and out.

Cam Locks

The new stem comes with cam locks and offer great stability.

Coil Cover

It does its job just fine.

Performance

Okay, this is the “meat and potatoes” of the review.  Does this machine find the goods?  Yes, it does.  I have found some awesome finds with this detector.  Early coppers, all kinds of silver coins (it’s a silver hound!), jewelry, relics, etc.

I was pretty shocked at how easy it is to learn this machine.  Some other machines can take a long time to master effectively.  I was finding very nice stuff almost immediately.  It can find stuff at very nice depths.  I recently found a small, silver woman’s ring at around 10 inches.  That signal was very faint, but it was good enough to make me dig.

I also love the target separation on this machine.  I cannot tell you how many times I have found coins right next to, or below, iron and junk targets.  Those signals are typically strange, but the good signals do come through.  I cannot wait to get the smaller coil!

One of the major appeals to this detector is the ability to use it in water.  I have used it in both salt and fresh water.  Does it rival top water detectors and pulse induction detectors on the beach?  No, it does not.  But it can do the job.  You definitely want to hunt in parallel lines to the water line on the beach – so you don’t have to adjust the ground balance a ton.  But it does work pretty well.  It does just fine in freshwater.

There were stories of the Garrett AT Pro leaking and falsing.  These were an issue when the AT was first released.  I don’t see these as an issue now.  I have never had an issue with this detector and many say the same since they did some modifications.  If you are buying a new version of this machine, you will have those modifications – so don’t sweat it!  And if something does happen, Garrett does service very well.

I have to say that once I started working in the pro mode zero, I have never looked back.  The tones are really nice and the TID can really help you.  If you take the time to learn this machine, you will find lots of really amazing stuff.  I have taken this machine to locations that have been hunted very heavily and found great finds.  One such location was a park that is now a sledding hill.  I hunted the top of the hill really slowly and got a deep tone that was barely audible.  Out comes a very nice Barber dime.  This type of scenario is repeated often for me.

The screen can get scratched and does have glare.  A quick answer for that is to cover it with a phone screen protector.  That really helps stop the glare and protects the screen.  Some users have also reported bubbling on the screen cover.  Garrett is typically all over these types of issues.  Again, their service is extremely good.

I can’t speak to relic hunting as much.  But I do know from reading countless posts that people also like the iron capabilities of the AT Pro.

And the 15 kHz frequency offers great ability to get those smaller jewelry finds.  Personally I love this, along with the double D coil.  The double D coil see down like a “slice.”  This, coupled with the frequency, has gotten me some great finds in small places.  I have had trouble with concentric coils in those types of scenarios.  Also, I like that tradeoff on depth with the frequency, when coupled with the double D coil.  I hope that makes sense.

Overall Impression

The AT Pro is really an amazing metal detector that I would whole-heartedly recommend to my closest friends.  It’s hard to beat the combination of features with the mid range price point.  I can take this detector with me almost anywhere and know that I can go metal detecting.  And I know that I will find stuff!  It is an absolute silver hound.  I have been shocked at the amount of silver I have found with it.  If you are on the fence about purchasing this machine, please put those doubts aside.  If you do the research and get on good sites, you will be happy with what this detector can find for you.  No, it doesn’t offer the greatest depth or the best saltwater detecting, but man, it does incredibly well.